![]() |
![]() |
Enshin: small $180
large $240
The large Enshin (pictured) is approximately 4 to 4 and 1/2" long (10.5+ cm) and weighs about an ounce and a half (45 gr+)of solid sterling silver.
Grinding and polishing are done by hand with the aid of a motorized polisher. I do my best to hand form and polish these tools. You will notice the subtle signs of hand working.
I have acquired a small lathe. Current tools are more symmetric than my old ones. The large ball is around 5/8 inches in diameter. The small ball at the end of the taper is approximately 3/32 inch (<3mm) in diameter. The bar is 1/4 inch (6mm+) thick.
The small enshin is about 3 1/2 inches long and its ball is only about 9/16 inch in diameter. It is well suited for smaller hands.
I am adding another few styles to this tool in the near future. Some folks have complained that the large size is too heavy for them to use on 7 or 8 patients in a row! So look for lighter, sleeker styles soon!
Back to Meridian
Therapy Tools Page
Contact
us
Golden Spirit
Asheville North Carolina USA
828-216-1422
page revised March 2007
copyright 2007 Golden Spirit